When it comes to maintaining a home, there can be a multitude of things to consider and remember. From lawn care to making sure the furnace turns on when the winter months hit, to always making sure that garage door lifts the moment you press the button. That’s right, even garage door openers fall under the “home maintenance” category. Even though it may not come up very often, when replacing the opener it is important to note a few things, starting with the kind of opener you would want to install.
1. Chain Drive Openers
When taking this option into consideration, one of the key factors it has to offer is its cost-effectiveness. Additionally, this is also a very popular option, which means that when it comes time to replace any parts or pieces they will be found readily. However, there is one downside, noise. Though these may be cost-effective and easily found, they can be on the louder side.
2. Screw-drive Openers
This option is more of a well-rounded choice due to having very few moving parts. It is also known to be quite reliable as well. Though this may not be the quietest option on the market, it does fall in the middle of the road as far as noise “pollution” is concerned. It should also be noted that screw drives need a little more maintenance than other garage door openers, in spite of having fewer moving parts. Additionally, if they do not receive proper and regular lubrication they can seize up.
3. Belt-drive Openers
These particular openers use a rubber on rubber style belt on a cog in order to open and close your garage door. Since it isn’t equipped with any metal parts, this is actually one of the quietest options available. The one downside to this option is that these openers often stop and start at full power, which means that it can cause a rather jerky open and close for the door itself, thus creating excess noise and negating the quietness of the opener.
4. Direct-drive and Jackshaft Openers.
These are the more dependable and extremely quiet options out on the market, and though they are less common than the above-mentioned choices, they are gaining popularity. Though one should note that these particular openers only work with certain garage doors, so if you are replacing a current opener, it will be good to make note of whether this option will work for you.
Now that we’ve covered the first half of what you want to consider when purchasing a garage door opener, let’s move on to talking about horsepower.
5. ½ Horsepower
This option is best suited to a standard door. Which, is the most common door installed. It should also be noted that 1/2-Horsepower is the standard motor speed. Though this option can lift most garage doors, if you have a well-insulated door, a one-piece, or a wooden door, that can put an additional strain on the motor itself. So it might be best to consider amping up the horsepower in order to prevent an excess of wear and tear.
6. ¾ Horsepower
This is something to consider if you have an insulated (one-piece) or a wooden door. This option is the next step up from the half horsepower that was previously mentioned. By adding some additional power it makes these motors far more durable, and longer lasting. The downside is the increased price tag, however, they make up for that with less wear and tear and the extra power.
7. 1 Horsepower
This option is perfect for those needing to replace the garage door openers on their industrial doors. As you know, those are some of the heaviest doors one can have installed, which means more horsepower and a stronger motor are required. It should also be noted that this option is also better for those who have opted for an oversized garage door. Though the price also increases as the horsepower does, it is more than worth it.
8. What Type of Motor You Will Need?
Not only is discovering the amount of horsepower important, but the motor that runs everything needs to match your needs as well. There are two types, an AC and a DC motor. If you need a little guidance on what would be best, check out liftmaster garage door opener repair.
9. Type of Current
Direct current motors are the most common in the realm of belt drives, however, more manufacturers are also incorporating them into various other drive types. Though direct current motors can cost a little more, they do offer the added bonus of softer starts and stops. This then prevents the noise pollution mentioned above. Not only that, but it also puts less of a strain on the entire system, which means overall less wear and tear.
10. Choosing the Right System for Your Door
This is going to be one of the most important aspects of the repair and replacement side of garage door openers. Since there are so many different kinds of doors, both industrial and home grade, it is important to make note of how heavy the door is; from there you would be able to determine the level of horsepower you would need, and after that move on to the correct garage door opener.
11. Accessories For Your Garage Door Remote
Yes, that’s right! There are, in fact, ways to deck out the garage door opener remote that sits in your vehicle. For some, they like the basic “open and close” option, but for others, they like the idea of being able to turn the garage lights on and off with their remote, as well as opening and closing their garage door. No matter how fancy or simple you want to go with your remote, there is an option as customized to you as the garage door opener system itself.
Whether you are replacing or repairing, there are countless options for installing a new garage door opener, and countless ways to “customize” it to your needs and preferences. So no matter what you are looking for, there will be something to save you time, and in the long run, money.